PVAc water base adhesive

Available for a variety of wood bonding,Gluing strength reaches D4 waterproof grade, JAS boiling water soaking dry baking standard.Environmentally friendly.

Request a Quote
PRODUCT INTRODUCTION
PVAC glue is a kind of water-soluble adhesive, which is prepared by polymerization of vinyl acetate monomer under the action of initiator. Commonly known as white latex or PVAC emulsion for short, the chemical name of polyvinyl acetate adhesive. PVAC glue is safe, non-toxic, non-combustible, easy to clean, curing at room temperature, good adhesion to wood, paper and fabric, high adhesive strength, colorless and transparent after curing, good toughness, no pollution of the adhesive;
Product code
Appearance
 PH
Solid content
Viscosity (25/cps)
Characteristics and application fields
PG80
White liquid
3±0.5
52±2%
18000±3000
High solid content high quality One- componet water-based glue. Good solvent resistance, short curing time. Strong bonding, suitable for high require room temperature and high frequency assembly and lamination. It can be used in furniture manufacture, musical instrument area.
PG52
Light yellow
3±0.5
50±2%
15000±3000
High solid content high quality One- componet water-based glue. Good solvent resistance, short curing time. Strong bonding, suitable for high require room temperature and high frequency assembly and lamination. It can be used in furniture manufacture, musical instrument area.
PG85HV
White liquid
3±0.5
48±2%
13000±5000
High solid content high quality One- componet water-based glue. Good solvent resistance, short curing time. Strong bonding, suitable for high require room temperature and high frequency assembly and lamination. It can be used in furniture manufacture, musical instrument area.
PG37FH-3
White liquid
3±0.5
50±2%
18000±3000
High solid content high quality One- componet water-based glue. Good solvent resistance, short curing time. Strong bonding, suitable for high require room temperature and high frequency assembly and lamination. It can be used in furniture manufacture, musical instrument area.
PG660/1
Light yellow/ White liquid
4±0.5
46±2%
16000±2000
Good weather and solvent resisitance. It can be used for cold pressing and hot pressing of all kinds of wood speices, also suitable for assembly, finger jointing, thickness adding of MDF and 45degree assembly.
9603
White liquid
4±0.5
38±2%
35000±5000
One-component high quality water base glue. It can be used for veneering manually. The veneer should below 0.44mm. Good initial viscosity, easy handle. Good boning.
9630
White liquid
5±0.5
28±2%
8000±2000
Good weather and solvent resisitance. It can be used for cold pressing and hot pressing of all kinds of wood speices, also suitable for assembly, finger jointing, thickness adding of MDF and 45degree assembly.

Suitable for different kinds of wood at room temperature / thermocompression bonding.Strong initial tack, fast curing speed and long open time
High bonding strength,Environmentally friendly without formaldehyde(NAF),Excellent weather resistance under cold and heat cycle test,